Soos in die verlede gaan Tafelberg Erfgoed Versamelaars die beste voet ver voorentoe sit en net die beste uithaal om blink opgevryf uit te stal!
As in the past, Tafelberg Heritage Collectors is going to put its's best foot forward and show off!
Kom kyk, eet, neem deel en sluit die erfenis maand af met 'n lekker nostalgiese dag wat lank onthou sal word.
Come eat, take part and end heritage month with a nostalgic day that you will remember for a long long time

So spoed die dag nader!
The day is speeding towards us!

Hier is so 'n paar riglyne en lusmakertjies:

Only a couple of guidelines:

DIE BELANGRIKSTE GELEENTHEID HIERDIE JAAR OM TE ONTSPAN, GENIET EN TE KUIER SAAM MET VRIENDE EN FAMILIE!

TTHE MOST IMPORTANT EVENT THIS YEAR TO RELAX, ENJOY AND JUST BE WITH FRIENDS AND FAMILY!

 

Daar is iets vir almal, dis waar. Julle kan maar kom kyk.
Something for everybody, that is true. You can come an see for yourself.

Waar/Where:          Delvera            

Wanneer/When:      29 en 30 September 2018

Tye/Times:             Saterdag: 08:00 tot 16:0
                             Sondag:  08:00 tot 15:00

      

Kaartjies/Tickets:    Volwassenes R50
                             Skoliere R10

Kaartjies by die hekke, maak seker jy het die regte geld gereed, anders moet jy nog langer wag om als te sien en beleef!

Tickets at the gates, make sure you have the correct amount ready, you do not want to wait too long to go in and see what is going on!

 

Maak nuwe vriende en loop ou kennise weer raak.
Make new friends and find old friends again.

Wat alles daar te sien is, is nogal ‘n lang lys, maar kom ons begin:
There are lots to see, it is a long list, let us start:

     1.    Veteraan Trekkers

          Veteran Tractors

     2.    Veteraan statiese enjins

          Veteran Static Engines

    3.    Baie ou en ouer motors

         Very old and older cars

    4.    Bakkies en lorries en motorfietse

         Trucks, bakkies and bikes

     5.   Die kanonvereeniging  - Jy kan 'n skoot of twee skiet @ R100.00 elke

     The canon society - You can shoot the canon for only R 100.00 per shot

    6.    Militêre uitstallings

          Military exhibitions

7.    Binneshuise uitstallings

     Indoor exhibitions

8.    Landrover - 70ste verjaarsdag

     Landrover - 70th birthday

9.    Landcruizers

     Landcruizers 

Daar is nog baie!

And lots more!

Bootscooters gaan vir ons wys hoe om lyndanse te doen.

Bootscooters will do linedancing

Die Volkspelers gaan ook speel.

The Volkspelers will also dance.

Daar is baie om te eet, van regte kos tot regte peuselkos!

Lots to eat, from real food to real snacks!

Burgers,

 roosterkoek,

 wafels,

 moerkoffie en ander soorte koffie,

 worsrolle,

 braaivleis,

 potjiekos,

 ROOMYS

 en allerhande lekkertes!

Wyntuin en Craft Bier
Wine garden and Craft Beer

 Kom en geniet die tyd saam met ons!

Come and enjoy the time with us!

Engen Engine Restouration Competition 2018:

Tafelberg's Young Men WON the Western Cape leg of the competition!

Senior:
First price:             Johann Rust
Second price:        Francois van Rooyen
Junior:
First price:            Drosdy's first team
Second price:       Augsburg's team

Congratulations to these young men, may they have a final round that they always will remember and bring some prizes back to the Western Cape.

                                                                                                                 


Andy Self wrote this article about the Engine day at Piket:

Local fuel-and-oil company Engen is the generous sponsor of a competition with the goal of encouraging particularly younger people to the Stationary Engine hobby. There is a junior class for school-goers and senior for the rest. The competition is run under the auspices of SAVTEC, our National Federation of Tractor and Engine Clubs. The prize money is spread widely among contestants, so as not to be ‘winner-takes-all’. Entries are either individuals or teams, with a mentor who can be a friend, relation or teacher. During the restoration process, a ‘work-book’ must be compiled describing the mechanical aspects, budgeting, outside help, suppliers, skills learned, safety procedures etc, including ‘before’, ‘during’ and ‘after’ photos. After the engine has been judged, contestants are interviewed by a panel, as if being asked about their engine by a visitor to a show, which tests their public speaking abilities too! The ‘work book’ and the interview are judged separately from the engine itself and carry points towards the final outcome. The Display Board is also judged with the engine.
 

The West Cape semi-finals were held during an Engine Day on 16th June in Piketberg, 130 km north of Cape Town and there were 11 entries, the majority in the junior class. Three entries were from school teams. There was a good turn-out for the day and as usual a wide variety of engines from UK, USA, Continental Europe and Australia. Presentation varied from highly restored to ‘off-farm’. Food and drinks were available from the local Women’s Association. There was a prize-giving at which the two seniors and two juniors were announced, but every contestant went away with prizes; a bucket-full of promotional products from Engen and some tools from the West Cape Club, and the judges didn’t go away empty-handed either! The four successful contestants will be at the Finals at the Willem Prinsloo Agricultural Museum in Pretoria in October. It was hard work to organise the competition and judge the engines, work-books and ‘live presentations’, but I’m sure we have several new enthusiasts in our hobby, so it was worth it!

Smit Engineering’s massive Blackstone TP2 on a low-bed.

Johann Rust’s Briggs & Stratton engine, display board and the hard-copy of his ‘work-book’.

 

Gordon Riley’s clever display of engine with clutch driving a reduction gear, which in turn is driving a partly-restored engine, so one could see the piston and valves moving up and down!

Busy scene on the engine-line!

 

'Made in Occupied Japan' after WW2 and imported by Battery and Lighting in Cape Town, whose name it bears, ‘B&L’. Several of these engines have turned up in preservation, many with consecutive serial numbers.

 

We seldom see a Stover of any model!

 Philip Gray-Taylor’s Massey Harris, with a lot of its original paint.

Mick Skelly is new to our hobby and shows us here how a motor-cycle enthusiast can restore an engine! He was given three Wolseleys to make one of, and restored them all!

Another clever display by Gordon Riley. A Gravely cross-flow side-valve engine, partly restored, with its cylinder head ‘ready to replace’ on steel brackets.

This Lister D is being kept from walking away by heavy track-rollers. The hopper is boiling merrily!

A smaller (?) Blackstone P engine barking away.

A very welcome forklift for loading/unloading!

Leaking a bit of oil, this tired, but willing stationary version of a Caterpillar D4 7U, a D311 is being made to work hard against a wooden block.

 

There was a request for information on this Anton Schluter two-stroke hot bulb. Help was at hand from David Stemmet who was at the show. David has restored to running condition, the very tired-looking one pictured on page 16 of Stationary Engine Magazine issue 311 of February 2000!

Regards

Andy Selfe

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Philip Gray-Taylor’s Massey Harris, with a lot of its original paint.